View 2SD560_935438.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
SILICON POWER TRANSISTOR
2SD560
NPN SILICON EPITAXIAL TRANSISTOR (DARLINGTON CONNECTION) FOR LOW-FREQUENCY POWER AMPLIFIERS AND LOW-SPEED SWITCHING
The 2SD560 is a mold power transistor developed for lowfrequency power amplifiers and low-speed switching. This transistor is ideal for direct driving from the IC output of devices such as pulse motor drivers and relay drivers, and PC terminals.
ORDERING INFORMATION
Ordering Name 2SD560 Package TO-220AB
FEATURES
* C-to-E reverse diode inserted * Low collector saturation voltage
(TO-220AB)
ABSOLUTE MAXIMUM RATINGS (TA = 25C)
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current (DC) Collector current (pulse) Base current (DC) Total power dissipation Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC(DC) IC(pulse) IB(DC) PT Tj Tstg TC = 25C TA = 25C PW 10 ms, duty cycle 50% Conditions Ratings 150 100 7.0 5.0 8.0 0.5 30 1.5 150 -55 to +150 Unit V V V A A A W W C C
INTERNAL EQUIVALENT CIRCUIT
1. Base 2. Collector 3. Emitter
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Not all devices/types available in every country. Please check with local NEC representative for availability and additional information.
Document No. D14863EJ3V0DS00 (3rd edition) Date Published April 2002 N CP(K) Printed in Japan
(c)
2002 1998
2SD560
ELECTRICAL CHARACTERISTICS (TA = 25C)
Parameter Collector cutoff current DC current gain Symbol ICBO hFE1 hFE2 Collector saturation voltage Base saturation voltage Turn-on time Storage time Fall time VCE(sat) VBE(sat) ton tstg tf Conditions VCB = 100 V, IE = 0 A VCE = 2.0 V, IC = 3.0 A VCE = 2.0 V, IC = 5.0 A IC = 3.0 A, IB = 3.0 mA
Note
MIN.
TYP.
MAX. 1.0
Unit
A
2,000 500
6,000
15,000
Note
Note
0.9 1.6 1.0 3.5 1.2
1.5 2.0
V V
IC = 3.0 A, IB = 3.0 mANote IC = 3.0 A, RL = 16.7 , IB1 = -IB2 = 3.0 mA, VCC 50 V Refer to the test circuit.
s s s
Note Pulse test PW 350 s, duty cycle 2%
hFE CLASSIFICATION
Marking hFE1 MB 2,000 to 5,000 LB 3,000 to 7,000 KB 5,000 to 15,000
SWITCHING TIME (ton, tstg, tf) TEST CIRCUIT
Base current waveform
Collector current waveform
2
Data Sheet D14863EJ3V0DS
2SD560
TYPICAL CHARACTERISTICS (TA = 25C)
Total Power Dissipation PT (W)
With infinite heatsink (Tc = 25C)
Without heatsink
Collector Current IC (A)
Heatsink': 2.0 mm Aluminum, bpard No insulating boad Silicon brease coating Horizontal level
Single pulse
Temperature T (C)
Collector to Emitter Voltage VCE (V)
Pulse test
Collector Current IC (A)
DC Current Gain hFE
Collector Current IC (A) Collector to Emitter Voltage VCE (V)
Base Saturation Voltage VBE(sat) (V) Collector Saturation Voltage VCE(sat) (V)
Pulse test
Collector Current IC (A)
Data Sheet D14863EJ3V0DS
3
2SD560
PACKAGE DRAWING (UNIT: mm)
1. Base 2. Collector 3. Emitter 4. Fin (collector)
4
Data Sheet D14863EJ3V0DS
2SD560
[MEMO]
Data Sheet D14863EJ3V0DS
5
2SD560
* The information in this document is current as of July, 2001. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above).
M8E 00. 4

▲Up To Search▲

Price & Availability of 2SD560

	To Download 2SD560 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .